Generic Description: | RMS of Altimeter Range | |||||
Parameter: | stdalt | Recordmap: | instr | |||
Unit: | m | Size: | +2 | Scaling: | -3 |
CryoSat-2 (Extended Mission)
GOP 1Hz |
RMS of Altimeter Range |
CryoSat-2
GOP 1Hz |
RMS of Altimeter Range |
ERS-1 (Phase A)
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase B)
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase C)
SGDR/REAPER 1Hz |
RMS of Altimeter Range |
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase D)
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase E)
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase F)
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase G)
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-2
SGDR/REAPER 1Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
ERS-2
SGDR/REAPER 20Hz |
RMS of Altimeter Range
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: ocean_range_rms |
Envisat (Extended Mission)
SGDR v2.1 1Hz |
RMS of Altimeter Range |
Envisat (Extended Mission)
SGDR v3.0 1Hz |
RMS of Altimeter Range
Source: SGDR v3.0 Original-Parameter: range_ocean_rms_01_ku |
Envisat
SGDR v2.1 1Hz |
RMS of Altimeter Range |
Envisat
SGDR v2.1 20Hz |
RMS of Altimeter Range
Source: SGDR v2.1 |
Envisat
SGDR v3.0 1Hz |
RMS of Altimeter Range
Source: SGDR v3.0 Original-Parameter: range_ocean_rms_01_ku |
Geosat Follow-On
GDR 1Hz |
RMS of Altimeter Range |
Jason-1 (Extended Mission)
SGDR-E 1Hz |
RMS of Altimeter Range |
Jason-1 (Geodetic Mission)
SGDR-E 1Hz |
RMS of Altimeter Range |
Jason-1
SGDR-E 1Hz |
RMS of Altimeter Range |
Jason-2 (Extended Mission)
SGDR-D 1Hz |
RMS of Altimeter Range |
Jason-2 (Extended Mission)
SGDR-D 20Hz |
RMS of Altimeter Range |
Jason-2 (Geodetic Mission, Phase 1)
SGDR-D 1Hz |
RMS of Altimeter Range |
Jason-2 (Geodetic Mission, Phase 2)
SGDR-D 1Hz |
RMS of Altimeter Range |
Jason-2
SGDR-D 1Hz |
RMS of Altimeter Range
Source: SGDR-D Original-Parameter: range_rms_ku |
Jason-2
SGDR-D 20Hz |
RMS of Altimeter Range
Source: SGDR-D Original-Parameter: range_rms_ku |
Jason-3 (Extended Mission)
SGDR-F 1Hz |
RMS of Altimeter Range
Named range_rms_ku in GDR-D standard. Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/range_ocean_rms |
Jason-3 (Extended Mission)
SGDR-F 20Hz |
RMS of Altimeter Range
n.a. |
Jason-3
SGDR-D 1Hz |
RMS of Altimeter Range
Source: SGDR-D Original-Parameter: range_rms_ku |
Jason-3
SGDR-D 20Hz |
RMS of Altimeter Range
Source: SGDR-D Original-Parameter: range_rms_ku |
Jason-3
SGDR-F 1Hz |
RMS of Altimeter Range
Source: SGDR-F Original-Parameter: data_01/ku/range_ocean_rms |
Jason-3
SGDR-F 20Hz |
RMS of Altimeter Range
n.a. |
Poseidon
GDR 1Hz |
RMS of Altimeter Range |
SARAL (Drifting Phase)
SGDR-T 1Hz |
RMS of Altimeter Range |
SARAL
SGDR-T 1Hz |
RMS of Altimeter Range |
Sentinel-3A (SAR)
SGDR/NTC 1Hz |
RMS of Altimeter Range |
Sentinel-3B (SAR)
SGDR/NTC 1Hz |
RMS of Altimeter Range |
Sentinel-6A (HR)
NTC/F08 1Hz |
RMS of Altimeter Range
Standard deviation of 20 Hz measurements. Compression of the 20 Hz measurements is preceded by a detection of outliers. Only valid 20 Hz values are used to compute this 1 Hz measurement. Source: NTC/F08 Original-Parameter: data_01/ku/range_ocean_rms |
Sentinel-6A (HR)
NTC/F08 20Hz |
RMS of Altimeter Range
n.a. |
Sentinel-6A (LR)
NTC/F08 1Hz |
RMS of Altimeter Range
Standard deviation of 20 Hz measurements. Compression of the 20 Hz measurements is preceded by a detection of outliers. Only valid 20 Hz values are used to compute this 1 Hz measurement. Source: NTC/F08 Original-Parameter: data_01/ku/range_ocean_rms |
Sentinel-6A (LR)
NTC/F08 20Hz |
RMS of Altimeter Range
n.a. |
Topex (Extended Mission)
GDR 1Hz |
RMS of Altimeter Range |
Topex (Extended Mission)
GDR-F 1Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE4 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku |
Topex (Extended Mission)
GDR-F 20Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE4 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku |
Topex
GDR 1Hz |
RMS of Altimeter Range |
Topex
GDR-F 1Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE4 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku |
Topex
GDR-F 20Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE4 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku |
Cryosat-2 (SAR)
SGDR-E 20Hz |
RMS of Altimeter Range |
Cryosat-2 (SAR, Extended Mission)
SGDR-E 20Hz |
RMS of Altimeter Range |
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-2
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
Envisat
SGDR v2.1 20Hz |
RMS of Altimeter Range
Source: SGDR-D |
Jason-2
SGDR-D 1Hz |
RMS of Altimeter Range |
Jason-2
SGDR-D 20Hz |
RMS of Altimeter Range
Source: SGDR-D Original-Parameter: range_rms_ku |
Jason-3 (Extended Mission)
SGDR-F 20Hz |
RMS of Altimeter Range
n.a. |
Jason-3
SGDR-D 1Hz |
RMS of Altimeter Range |
Jason-3
SGDR-D 20Hz |
RMS of Altimeter Range
Source: SGDR-D Original-Parameter: range_rms_ku |
Jason-3
SGDR-F 20Hz |
RMS of Altimeter Range
n.a. |
Sentinel-6A (HR)
NTC/F08 20Hz |
RMS of Altimeter Range
n.a. |
Sentinel-6A (LR)
NTC/F08 20Hz |
RMS of Altimeter Range
n.a. |
Topex (Extended Mission)
GDR-F 1Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE3 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku_mle3 |
Topex (Extended Mission)
GDR-F 20Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE3 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku_mle3 |
Topex
GDR-F 1Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE3 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku_mle3 |
Topex
GDR-F 20Hz |
RMS of Altimeter Range
RMS of 20 Hz Ku-band MLE3 range measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: range_rms_ku_mle3 |
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-2
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
Envisat
SGDR v2.1 1Hz |
RMS of Altimeter Range |
Envisat
SGDR v2.1 20Hz |
RMS of Altimeter Range |
Jason-2
SGDR-D 20Hz |
RMS of Altimeter Range
RMS of the Ku band range (MLE3 retracking) Source: SGDR-D Original-Parameter: range_rms_ku_mle3 |
Jason-3 (Extended Mission)
SGDR-F 1Hz |
RMS of Altimeter Range
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/range_adaptive_rms |
Jason-3 (Extended Mission)
SGDR-F 20Hz |
RMS of Altimeter Range
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/range_adaptive_rms |
Jason-3
SGDR-F 1Hz |
RMS of Altimeter Range
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/range_adaptive_rms |
Jason-3
SGDR-F 20Hz |
RMS of Altimeter Range
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/range_adaptive_rms |
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
ERS-2
SGDR/REAPER 20Hz |
RMS of Altimeter Range
n.a. |
Envisat
SGDR v2.1 20Hz |
RMS of Altimeter Range |
Cryosat-2 (SAR)
SGDR-E 20Hz |
RMS of Altimeter Range
Source: instr.01 (Cryosat-2 ICE Baseline-E (SAR)) MVA-Parameters: - RMS of Altimeter Range (stdalt.01) |
Cryosat-2 (SAR, Extended Mission)
SGDR-E 20Hz |
RMS of Altimeter Range
Source: instr.01 (Cryosat-2 ICE Baseline-E (SAR)) MVA-Parameters: - RMS of Altimeter Range (stdalt.01) |
All Missions | RMS of Altimeter Range
RMS of Altimeter Range from ALES Retracker |
All Missions | RMS of Altimeter Range |
All Missions | RMS of Altimeter Range |