| Generic Description: | RMS of Significant Wave Height | |||||
| Parameter: | stdswh | Recordmap: | instr | |||
| Unit: | m | Size: | +2 | Scaling: | -2 | |
|
CryoSat-2 (Extended Mission)
GOP 1Hz |
RMS of Significant Wave Height |
|
CryoSat-2
GOP 1Hz |
RMS of Significant Wave Height |
|
ERS-1 (Phase A)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase B)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase C)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height |
|
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase D)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase E)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase F)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase G)
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-2
SGDR/REAPER 1Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-2
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
Envisat (Extended Mission)
SGDR v2.1 1Hz |
RMS of Significant Wave Height |
|
Envisat (Extended Mission)
SGDR v3.0 1Hz |
RMS of Significant Wave Height
Source: SGDR v3.0 Original-Parameter: swh_ocean_rms_01_ku |
|
Envisat
SGDR v2.1 1Hz |
RMS of Significant Wave Height
Source: SGDRv2.1 |
|
Envisat
SGDR v2.1 20Hz |
RMS of Significant Wave Height
Standard deviation of 18hz ku-band significant wave height Source: SGDR v2.1 Original-Parameter: sd_18hz_ku_swh (Field number 56) |
|
Envisat
SGDR v3.0 1Hz |
RMS of Significant Wave Height
Source: SGDR v3.0 Original-Parameter: swh_ocean_rms_01_ku |
|
Geosat Follow-On
GDR 1Hz |
RMS of Significant Wave Height |
|
Jason-1 (Extended Mission)
SGDR-E 1Hz |
RMS of Significant Wave Height |
|
Jason-1 (Geodetic Mission)
SGDR-E 1Hz |
RMS of Significant Wave Height |
|
Jason-1
SGDR-E 1Hz |
RMS of Significant Wave Height |
|
Jason-2 (Extended Mission)
SGDR-D 1Hz |
RMS of Significant Wave Height |
|
Jason-2 (Extended Mission)
SGDR-D 20Hz |
RMS of Significant Wave Height |
|
Jason-2 (Geodetic Mission, Phase 1)
SGDR-D 1Hz |
RMS of Significant Wave Height |
|
Jason-2 (Geodetic Mission, Phase 2)
SGDR-D 1Hz |
RMS of Significant Wave Height |
|
Jason-2
SGDR-D 1Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight Source: SGDR-D Original-Parameter: swh_rms_ku |
|
Jason-2
SGDR-D 20Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight Source: SGDR-D Original-Parameter: swh_rms_ku |
|
Jason-3 (Extended Mission)
SGDR-F 1Hz |
RMS of Significant Wave Height
Named swh_rms_ku in GDR-D standard. Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/swh_ocean_rms |
|
Jason-3 (Extended Mission)
SGDR-F 20Hz |
RMS of Significant Wave Height
n.a. |
|
Jason-3
SGDR-D 1Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight Source: SGDR-D Original-Parameter: swh_rms_ku |
|
Jason-3
SGDR-D 20Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight Source: SGDR-D Original-Parameter: swh_rms_ku |
|
Jason-3
SGDR-F 1Hz |
RMS of Significant Wave Height
Source: SGDR-F Original-Parameter: data_01/ku/swh_ocean_rms |
|
Jason-3
SGDR-F 20Hz |
RMS of Significant Wave Height
n.a. |
|
Poseidon
GDR 1Hz |
RMS of Significant Wave Height |
|
SARAL (Drifting Phase)
SGDR-T 1Hz |
RMS of Significant Wave Height |
|
SARAL
SGDR-T 1Hz |
RMS of Significant Wave Height |
|
Sentinel-3A (SAR)
SGDR/NTC 1Hz |
RMS of Significant Wave Height |
|
Sentinel-3B (SAR)
SGDR/NTC 1Hz |
RMS of Significant Wave Height |
|
Sentinel-6A (HR)
NTC/F08 1Hz |
RMS of Significant Wave Height
Standard deviation of 20 Hz measurements. Compression of the 20 Hz measurements is preceded by a detection of outliers. Only valid 20 Hz values are used to compute this 1 Hz measurement. Source: NTC/F08 Original-Parameter: data_01/ku/swh_ocean_rms |
|
Sentinel-6A (HR)
NTC/F08 20Hz |
RMS of Significant Wave Height
n.a. |
|
Sentinel-6A (LR)
NTC/F08 1Hz |
RMS of Significant Wave Height
Standard deviation of 20 Hz measurements. Compression of the 20 Hz measurements is preceded by a detection of outliers. Only valid 20 Hz values are used to compute this 1 Hz measurement. Source: NTC/F08 Original-Parameter: data_01/ku/swh_ocean_rms |
|
Sentinel-6A (LR)
NTC/F08 20Hz |
RMS of Significant Wave Height
n.a. |
|
Topex (Extended Mission)
GDR 1Hz |
RMS of Significant Wave Height |
|
Topex (Extended Mission)
GDR-F 1Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE4 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku |
|
Topex (Extended Mission)
GDR-F 20Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE4 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku |
|
Topex
GDR 1Hz |
RMS of Significant Wave Height |
|
Topex
GDR-F 1Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE4 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku |
|
Topex
GDR-F 20Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE4 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku |
|
Cryosat-2 (SAR)
SGDR-E 20Hz |
RMS of Significant Wave Height |
|
Cryosat-2 (SAR, Extended Mission)
SGDR-E 20Hz |
RMS of Significant Wave Height |
|
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-2
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
Envisat
SGDR v2.1 20Hz |
RMS of Significant Wave Height
Standard deviation of 18hz ku-band significant wave height Source: SGDR v2.1 Original-Parameter: sd_18hz_ku_swh (Field number 56) |
|
Jason-2
SGDR-D 1Hz |
RMS of Significant Wave Height |
|
Jason-2
SGDR-D 20Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight Source: SGDR-D Original-Parameter: swh_rms_ku |
|
Jason-3 (Extended Mission)
SGDR-F 20Hz |
RMS of Significant Wave Height
n.a. |
|
Jason-3
SGDR-D 1Hz |
RMS of Significant Wave Height |
|
Jason-3
SGDR-D 20Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight Source: SGDR-D Original-Parameter: swh_rms_ku |
|
Jason-3
SGDR-F 20Hz |
RMS of Significant Wave Height
n.a. |
|
Sentinel-6A (HR)
NTC/F08 20Hz |
RMS of Significant Wave Height
n.a. |
|
Sentinel-6A (LR)
NTC/F08 20Hz |
RMS of Significant Wave Height
n.a. |
|
Topex (Extended Mission)
GDR-F 1Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE3 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku_mle3 |
|
Topex (Extended Mission)
GDR-F 20Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE3 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku_mle3 |
|
Topex
GDR-F 1Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE3 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku_mle3 |
|
Topex
GDR-F 20Hz |
RMS of Significant Wave Height
RMS of 20 Hz Ku-band MLE3 significant waveheight measurements. Only valid 20 Hz measurements are used to compute this element. Source: GDR-F Original-Parameter: swh_rms_ku_mle3 |
|
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-2
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
Envisat
SGDR v2.1 1Hz |
RMS of Significant Wave Height |
|
Envisat
SGDR v2.1 20Hz |
RMS of Significant Wave Height
Standard deviation of 18hz ku-band significant wave height Source: SGDR v2.1 Original-Parameter: sd_18hz_ku_swh (Field number 56) |
|
Jason-2
SGDR-D 20Hz |
RMS of Significant Wave Height
RMS of the Ku band significant waveheight (MLE3 retracking) Source: SGDR-D Original-Parameter: swh_rms_ku_mle3 |
|
Jason-3 (Extended Mission)
SGDR-F 1Hz |
RMS of Significant Wave Height
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/swh_adaptive_rms |
|
Jason-3 (Extended Mission)
SGDR-F 20Hz |
RMS of Significant Wave Height
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/swh_adaptive_rms |
|
Jason-3
SGDR-F 1Hz |
RMS of Significant Wave Height
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/swh_adaptive_rms |
|
Jason-3
SGDR-F 20Hz |
RMS of Significant Wave Height
Compression of Ku band high rate elements is preceded by a detection of outliers. Only valid high-rate values are used to compute this element Source: SGDR-F Original-Parameter: data_01/ku/swh_adaptive_rms |
|
ERS-1 (Phase A)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase B)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase C)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase D)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase E)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase F)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-1 (Phase G)
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
ERS-2
SGDR/REAPER 20Hz |
RMS of Significant Wave Height
Compression of Ku-band high rate elements is preceded by a detection of outliers. Only valid high rate values are used to compute this element. Source: SGDR/REAPER Original-Parameter: swh_rms |
|
Envisat
SGDR v2.1 20Hz |
RMS of Significant Wave Height
Standard deviation of 18hz ku-band significant wave height Source: SGDR v2.1 Original-Parameter: sd_18hz_ku_swh (Field number 56) |
|
Cryosat-2 (SAR)
SGDR-E 20Hz |
RMS of Significant Wave Height
Source: instr.01 (Cryosat-2 ICE Baseline-E (SAR)) MVA-Parameters: - RMS of Significant Wave Height (stdswh.01) |
|
Cryosat-2 (SAR, Extended Mission)
SGDR-E 20Hz |
RMS of Significant Wave Height
Source: instr.01 (Cryosat-2 ICE Baseline-E (SAR)) MVA-Parameters: - RMS of Significant Wave Height (stdswh.01) |
| All Missions | RMS of Significant Wave Height |
| All Missions | RMS of Significant Wave Height |
| All Missions | RMS of Significant Wave Height |